High-Profile Outdoor SMD led Screen

    About the SMD outdoor LED screen, two points are very important : Waterproof and Heat emission.

1)Waterproof, it needs to solved from design and manufacturing techniques . since the 1rt year of Cree outdoor SMD launched, there are 80% outdoor projects with Cree SMD which had problems because of rough techniques and quality .

2)Heating Emission, it needs to be solved from design and materials . Many companies adopted the solution by adding heat sinks on drive IC, but they fall off to cause problems of led screen after led screen is working in a long time .

3)A project of Outdoor SMD led screen had been installed in 2010 , please check below video: 

 More information please contact angela@designledpro.com or visit www.designledpro.com .

LED Industry News: Siemens, Mouser, Greenlux

Siemens has discovered a dark-red luminescent material suitable for creating warm-white LED light, Mouser has signed several new distribution agreements, and Greenlux Finland has to supply LED luminaires to Fagerhult. Siemens discovers dark-red luminescent material for warm LED light

Deep-red oxynitride phosphor

Researchers from Siemens Corporate Technology and Osram have discovered a new “dark-red” luminescent material for LEDs. The phosphor, described as “stable” (although further details are not available), is an oxynitride that apparently emits at a wavelength of up to 30 nm longer (deeper red) than other materials. The material was developed by Siemens researchers using a High Throughput Experimentation (HTE) technique, which enables automated evaluation of different material combinations, rather than testing them by hand. The researchers analyzed over 660 sample variants from twelve different material combinations over a period of just a few months to determine emission wavelength, light intensity, and structural phases (view press release).
Mouser signs several distribution agreements
Mouser Electronics, Inc. has recently signed distribution agreements with three manufacturers of LED-related products, namely LedLink Optics, Inc., The Bergquist Company and Illumitex, Inc.
Taiwan-based LedLink Optics, Inc. specializes in the manufacturing of high-quality secondary optics for high-power LEDs and is an official optical solution partner for Cree, Osram Opto Semiconductors, Seoul Semiconductor, and other leading LED manufacturers.
Bergquist is a leading developer and manufacturer of thermal-management materials, including Thermal Clad and thermally-conductive insulated metal substrate (IMS) circuit boards designed to replace conventional FR4 PCBs in LED applications.
Illumitex develops and manufactures HB-LEDs with optics integrated at the die level to provide more energy- and space-efficient illumination in general-, architectural- and horticulture-lighting applications.
Greenlux Finland Ltd signs LED luminaire deal with Fagerhult

Swedavia service hall

Greenlux Finland Ltd, a Finnish lighting-design firm and producer of LED luminaries, has entered into an agreement with AB Fagerhult, the largest company in the lighting industry in the Nordic Countries. Greenlux will deliver LED luminaries suitable for general lighting to Fagerhult, and these will be sold under the Fagerhult brand name. Initial applications for the luminaires will include car parks, warehouses and cold-storage facilities; these are applications for which Fagerhult, a 2000-employee company, has not previously had its own LED models.
Greenlux has delivered more that 10,000 units of its GLG series luminaries for car parks and industrial sites such as warehouses and maintenance and logistics hangars. The company claims to hold the leading market position in car-park LED lighting in Sweden. Greenlux’s press release gives more details of the company and the projects it has been involved in.

Elemental LED to Start 2nd Annual Cyber Monday Super Sale

San Francisco Bay Area-based company Elemental LED will discount its entire inventory of products by 35% on Cyber Monday, November 28th.
It’s the second year that the company will participate with online retailers in Cyber Monday, following last year when it also discounted products by 35%.

The LED Lighting Cyber Monday sale will begin on November 28th at 12:00 a.m. Eastern Standard Time and end on November 29th at 12:00 a.m. Pacific Standard Time. The company expects call volume to be high and has allocated extra personnel to assist customers over phone, chat and email, and to fulfill orders.

Elemental LED has prepared popular products including LED strip lights in varying degrees of brightness and colors, color-changing LED light bulbs and strip lights, waterproof LED light bars, dimmable LED puck lights, LED dimmer switches, unique LED Christmas lights and LED plug-and-play kits of all kinds.

NanoLumens Rolls Out Flex LED Displays

David Keene--LED walls have been around for years, so it can be hard to get excited about new product launches. Historically LED has been some combination of too expensive, physically heavy, and energy-sucking to make many inroads from its perch in the world of sports stadiums and a some rock concerts to the broader world of digital signage. This is changing — case in point, last week’s debut of a broad line of new LED products from NanoLumens at the Customer Engagement Technology World show in New York.

NanoLumens has been showing a few products at trade events for the past couple years, but last week’s news brings them to a new level. They showed last week a new line of products that demonstrate depth and breadth — both outdoor and indoor LED, from 10mm down to 4mm resolution. And NanoLumens’ displays are carving a fairly new niche — they are flexible, literally. They have options where you can bend the displays around walls, cylinders, and more. Furthermore, when you bend a Nanolumens LED display, the pixels remain at the same intervals from each other — a nice trick, keeping a “single bend line” to the pixels, that the company claims is patented and sets them apart. Looking at the displays the other day in New York, I was also struck by the very flat nature of the surfaces. In other words, the LED diodes, in their RGB clusters, seem upon touch to blend into the substrate, not protrude out or recess inward. This is different from a lot of the older LED designs where often black plastic or metal “shelves” or shades were designed into the surface to act against direct sunlight in outdoor applications for example (which often led to off-axis viewing degradation).

This is the press release from NanoLumens, last Wednesday:

NanoLumens has announced it will introduce an expanded line of Flex Displays, as well as its first line of Non-Flexible Displays, at the 2011 Customer Engagement Technology World (CETW) conference and exhibition taking place in New York at the Jacob Javits Convention Center.

In doing so, the company will take a giant leap forward in its quest to fully commercialize its “digital wall paper” technology that literally turns any surface into a powerful communications platform — while eliminating virtually all of the weight, installation, energy, and cost efficiency issues associated with traditional large format digital displays.

First introduced in 2010, NanoFlex and new NanoWrap flex digital displays remain the only solution of their kind. They conform to fit any surface, are thin, lightweight, energy efficient and can be mounted as easily as a work of art.

“Our Flex technology can now be assembled to satisfy any shape and size requirements, so any location can now become a dynamic and dramatic video display,” said Rick Cope, president and CEO of NanoLumens. “At the same time, our new line of NanoSlim and NanoShape non-flexible displays, available in 6mm, 5mm, and 4mm pixel pitches, will offer customers a more cost-effective alternative when flexibility is not a requirement.”

According to Cope, NanoLumens is the only company in the world able to reliably manufacture ultra-thin and lightweight, easy-to-install and maintain, seamless 6mm pixel pitch flexible digital displays in virtually any shape or size to meet each customer’s unique requirements.

The company’s patented display technology allows customers to select from 4mm up to 10mm pixel pitches (depending on the model).

“Now, any surface can become a compelling display surface as simply as hanging a mirror,” Cope emphasized. “This product line is going to forever change the rules of the game when it comes to creative customer engagement.”

In addition to being ultra-lightweight and energy efficient, NanoLumens displays feature a seamless, edge-to-edge picture quality (up to a brightness of 5,000 nits) that can be viewed from any angle or any distance without color shift or picture drop-off. Designed and engineered to be energy efficient, NanoLumens displays consume significantly less energy per-square foot than conventional digital displays. The NanoLumens displays are composed of up to 50 percent reclaimed materials, and are completely recyclable. Some new NanoLumens displays can be serviced from the front, making maintenance easier than ever before possible.

Designed and assembled entirely in the United States, NanoLumens displays are now available in both flexible and non-flexible frames in four product lines: NanoFlex and NanoWrap flexible displays; NanoSlim non-flexible rectangular displays; and NanoShape non-flexible round, square, and triangular displays.

“As the industry’s premier showcase of customer engagement technology solutions, we are tremendously excited to serve as the platform for the launch of this remarkable company and its expanded product line,” said general manager Lawrence Dvorchik. “When CETW attendees experience the NanoLumens product line, they are going to look at customer engagement in a totally new way.” 

http://www.youtube.com/watch?v=YRrEuY7VueU

P10 flexible LED screen gets approval of EMC test (EN55022-Class-A).

P10mm LED scroll, 2^nd Gen rubber flexible led screen, gets EMC (European Electromagnetic Compatibility) approval with standard of EN55022-Class-A by DesignLED Technology Company Limited based in Shenzhen in July, 2011.

P10mm flexible led screen is improved successfully from the circuits inside to structure outside with new technology plus to be approved by EMC standard, so it has much more reliable and stable performances. 

LED scroll, flexible led screen, is new gen patented rubber Flexible LED video screen, each tile with 320mm width 160mm height, and 12mm depth, with super lightweight 0.35kg per tile making it the ideal product for rental market but also very cost effective for fixed installation due to the ease of mounting such a lightweight tile. With full magnetic system to be quick installed on any mental sheets .

The flexible LED screen has a pixel pitch 10mm, and is suitable for indoor applications. With brightness levels of more than 1500nits brightness and 1200-4800Hz refresh rate with Linsn Control sytem, it delivers mega-bright, high-impact, and vivid video images.

DesignLED Technology company limited is based on in Shenzhen China , which is a professional provider of a complete solution of flexible LED screen including the demand analysis , R&D, manufacturing, and professional services . DesignLED already developed the Flexible LED screen, 3D LED display, Lightweight LED screen etc.

For more information, please visit the website: www.designledpro.com

Contact us at angela@designledpro.com
www.designledpro.com

Features of LED screens from DesignLED

Features of LED Screens

Shenzhen is the base of LED screens in the world , there are many factories, but the quality and price are quite different . The factor to decide the quality and price is the material.

DesignLED have following features of LED screens :

1）LED Tube：

Quality LED tubes for LED screens is a little higher price because of its high brightness, less attenuation, long lifespan , and color uniformity .

DesignLED chooses specialized chipsets to make sure it with better functions of heat emission, temperature durability, and antistatic, so it solves the reliability of LED screens fundamentally .

DesignLED selects chipsets after Die sorting to control brightness and color temperature range strictly, solving the problems of uniformity and consistency after package from the source .

DesignLED’s led screens with big viewing angels, no shades and dark areas 

2）Sophisticated manufacturing technology

By specialized tooling, LED modules are processing by Auto-SMT machine+ Circumfluence soldering, welding spots are consistent and reliable .

DC power cable with US standard, line loss is the min in the process of power transferring with stable voltage input.

Single input and output with horn sockets with stable and reliable data transmission.

3）Control system：

Quality Control system makes LED screen with higher refresh rate, color gray scale , and contrast ratio , and easy to be operated .

3.1 By using international advanced 65536(16bit) control technology to solve Mosaic completely when LED screen with lower gray scale, which makes image nature and color vivid to true video source .

3.2 With the contrast Ration is 6000:1 , image layer clear to overcome the brightness of effects from outside .

Louver of LED modules is processing with matt treatments to enhance contrast ratio of screen as well as the design of through on the surface to blur the seam between modules.

3.3 With 281.5 trillion colors to fully meet all kinds of advanced video sources to display vivid color .

3.4 By using drive board grayscale control and 65536(16bit) gray correction technology , integrated the non-linear correction into the drive IC, greatly improving data transmission rate as well as system stability. The non-linear correction way drives LEDs to meet the non-linear demands of human’s eyes to present vivid and stable image.

3.5 A single gigabit transmission and board-level gray-scale processing technology to improve he data transmission rate .1/8 scan screens’ refresh rate could be 2400Hz to eliminate the flickering and eye fatigue so as to meet the needs of digital photography equipment ultimately.

Low refresh rate results in scan lines on the screens .

（Left Image: 2400Hz；         Right Image: 300Hz）

Before improvement, led screen with low refresh rate have black scan lines invisible by eyes.

After improvement, led screen with high refresh rate has no lines.

3.6 Constant current drive to ensure the stability and reliability as well as extend the lifespan of LEDs and make sure the consistency of brightness .

3.7 With technology of redundancy to achieve scan controller two-way data transmission, It will not affect the screen performance if one of controller is broken or connection failed .

3.8 With industrial switching power supply derating 20% utlity. By advanced power managing technology with over-current, over-voltage, over-heating , and short circuit protection , the whole screen is with very low heat to work stably in long-term .

3.9 System technology standard resolution is 1280x1024 , but it is customized all kinds of high resolution led screens .

Distance between computer and LED screens :

Normal Ethernet cable : 100 meters

Fiber cable : 5k meter


Contact us at angela@designledpro.com for any further help .

4 sqm around Demo Kit --Flexible LED screen

Flexible led screen -- P10 indoor Rubber magnetic

2nd Gen indoor Rubber flexible led screen P10 demo kit 

Video here: 

In the left side , there are 3 pcs rigid LED modules mounted vertically on the flat surface , other 9 pcs are flexible led screen mounted on the convex and concave surface .

Welcome to visit www.designledpro.com 


Any help please feel free to contact angela@designledpro.com .

Flexible LED NanoLumens appears at London Bike Show

Standby were the first to use NanoLumens flexible LED screen, showcasing the action at The London Bike Show 2011UK - Exhibition production company Standby were the first to use NanoLumens flexible LED screen, showcasing the action in the Skoda Bike Arena at The London Bike Show 2011. The eye catching lightweight display was hung on truss above the live action from stunt performers in the Skoda Bike Arena, relaying sponsor videos, associated footage and company logos to promote the arena throughout Excel to the visiting crowds.

Dave Cooper of Standby explained: "We are the first production company to use the NanoLumens display since it was brought to the UK in January. It is a 112" display with all the picture quality and brightness of LED, but its lightweight and easy to install properties means it could be hung above the arena with very little infrastructure. Our clients were able to show full motion footage on this incredible large display with the minimum of fuss."

The Skoda Bike Arena was hosted by The Clan, a group of Scots wowing the crowds with cycle stunt shows. The team, who represent the most talented Scottish riders from trials, BMX and mountain biking showcased their skills, doing regular displays throughout the show, with bikes and riders flying through the air, performing near-impossible feats of balance and nerve.

Standby also created a diverse range of feature areas throughout this show and sister shows the Outdoors Show and London Boat Show 2011. The crew was kept busy with around half a dozen small seminar stages and larger features such as the British Bouldering Championships and the unique Skymasters suspended climbing wall.

The Outdoors Show also required a substantial "Heroes Theatre" in the Platinum Suite at ExCeL, playing host to some legendary speakers such as Sir Rannolph Fiennes and Sir Robin Knox-Johnston. Meanwhile, the London Boat Show hosted the spectacular Watersports Arena, a combination of live-action shows and have-a-go watersports taster sessions for visitors. Standby provided a complete technical package including full water-quality management and installation of the nearly 2 million litre capacity pool.

Nanolumens is a display technology innovator that has designed and manufactured a flexible digital LED display that can be curved in all four directions, flexed around walls and wrapped around columns with a 48" bend radius. The screen is lightweight and thin, which means it can be hung simply from ceilings, with very little infrastructure. Incredibly, they can be used in locations where large, heavy and fragile flat panelled displays are impractical to install or use.

Flexible LED screens Introduction

LED scroll, 2^nd generation rubber-based Flexible LED screen, is designed originally by DesignLED with its special features of flexibility to be used for any indoor unconventional LED applications.It could be like Curve , Arch , Wave, Roll , Right angle corner etc anything else .


LED scroll is the 2nd generation of Flexible LED screen with reliability, stability and the rate of final products almost the same as the traditional LED screens because of its special structure inside and outside . Now P7.62 and P10 are available at the moment .


Its features following :


1. Flexible LED screen  
2. Super lightweight 
3. Super thinness 
4. Very easy installation 
5. Energy Saving 
6. Fixed and Rental applications
7. Full Magnetic system  

Specification

Size: 320mmx160mm

Area:0.0512 m²/per module

Brightness: > 1500nits

Refresh Rate: 1200-4800Hz

Pixel Resolution: 32x16

Pixel Density: 10,000 pixels/m²

View Angle: 140° (H) & 140° (V)

Weight: 0.4kg/module

Operating Temp: 0℃ - +40℃

Pixel Pitch : 10mm

Pixel Configuration:  3 in 1 

LEDs Type: SMD 

Lifespan: >50,000 hrs

Operation Power: 88 - 264 VAC, 47 - 63 Hz 

Frequency: 60- 85 Hz

Max Power Consumption: 680 W /m² 

Average Power Consumption: 280 W /m²

Max Radius: 250mm

More information please feel free to contact us .

Contact: angela@designledpro.com
Web: www.designledpro.com

Display LED wins PLASA Innovation Award for digiFLEX

16 Sep 2008
The highly flexible LED display module can be curved around pre-formed metal surfaces.

digiFlex, the first-ever fully flexible LED video display

One of the Silver Award winners was UK-based LED specialist displayLED. Its digiFLEX product is described as the first LED screen that combines high-resolution, full colour video capability with a flexible architecture that lends itself to even the most demanding of applications.
“It’s fantastic to have the efforts of the displayLED creative and technical team recognised in this way,” comments the company’s managing director, Graham Burgess. “digiFLEX is a product that really does take LED into new territories. This is the first time we have exhibited at PLASA and the amount of interest, not only in digiFLEX, but in all our products, was incredible. We have enquiries from across the rental and staging sector including TV shows, theatre productions, rock concerts and all manner of public venues.”

Modular in its design, digiFLEX uses LEDs mounted onto a flexible PCB. It has a 10mm pixel pitch and 2000 nit of brightness.
digiFLEX tiles measure 320mm (w) x 160mm (h) and flex smoothly horizontally and vertically. They weigh less than 6kg per square metre – less than 10% that of a traditional LED display. digiFLEX tiles can be used as a skin for pre-formed curved metal surfaces, its magnetic mounted making it quick and easy to install.
The system will accept all inputs including HD and uses our standard processing systems. The feed from the control system is DVI but it will accept anything a digiPRO, digiPRO HD or digiPILOT will accept.

DesignLED Technology Compangy Limited

A Creative and Innovative Leader in LED display industry 

DesignLED Technology Company Limited is a privately-owned company based in Shenzhen, China. It is equipped with a powerful and strong team with the main manpower with abundant of experiences in LED display industry since 1995. Now after decades of LED display industry, DesignLED is one of the leading LED display complete solution providers in the world.
DesignLED focuses on the professional led display industry, offers complete solution for clients, which include demand analysis, system design, product R&D, Manufacturing, and professional services. DesignLED is engaged in providing high-quality and good-performance LED screens and solutions for all clients including professional distributors and end-users .
DesignLED delicates itself to constant LED technology innovations with its powerful R&D team and strong self-innovation capacity . It successfully developed the Flexible LED screen, 3D LED display, Dome LED screen, Lightweight LED screen, VMS traffic guidance system , Control system ,and Self-own chipset etc , with more than 10 products are applying for patents from China, EU, US until now. Furthermore, DesignLED is the pioneer and original designer of P10 Flexible LED screen since 2007.
DesignLED has also established the window of marketing and projects service for China and globe in Shanghai and Hong Kong, targeting to provide strong hardware & software supports and efficient value-added services home and abroad, which enables us to provide clients with quick response and convenient services. DesignLED has been successfully worked with top-class fixed, rental companies, and products have been used in numerous world-leading events.
DesignLED develops with the core value of company “People –Oriented, Professional, Innovative, Cooperative “and business concept of” Constant innovation and efficient value-added services “. DesignLED will persist carrying on constant innovations of technology, management and market as well as provide value-added service for customers, and vision to to be a global Pioneer and Leader for the complete LED solution provider of LED applications .

DesignLED Strengths

. More than 15 years experiences in R&D LED display 

. Offer complete design services of LED applications 

. Provide strong hardware & software support 

. Professional project management 

. Technical support and consultancy

. The third-part service 

. LED application feasible analysis for be-spoke services

. LED solutions & integrated systems 

. EMC test approval 

. Quality Control

DesignLED launches P7.62mm and P10mm indoor Flexible LED screen for Rental and Fixed market.

2011/5/16

DesignLED announces the release of LED scroll,  Flexible LED screen in May, 2011, based in Shenzhen China, because of its flexibility to be used in any creative application in Rental and Fixed installation. The indoor Flexible led screen is improved successfully from the circuits inside to structure outside. So it has much more reliable and stable performances than other flexible product.

So what’s it all about?

The Flexible LED screen is rubber-based Flexible LED video screen, each tile with 320mm width 160mm height, and 12mm depth, with super lightweight 0.5kg per tile making it the ideal product for rental market but also very cost effective for fixed installation due to the ease of mounting such a lightweight tile.

The flexible LED screen covers a range of pixel pitch like 7.62mm and 10mm, and is suitable for indoor applications. With brightness levels of more than 1500nits brightness and 1200-4800Hz refresh rate, it delivers mega-bright, high-impact, and vivid video images.

Product Features:

Flexible and bendable

As the LEDs are mounted onto FPCB board, the tiles are flexible and bendable offering the benefits of being able to create LED displays of any applications like Curve, Wave, Arch, Round, Right Angle etc. Also it can be concave and convex both with its max radius of 250mm, and 6 tiles connected could be a circle.

            

Easy installation

The full Magnetic System on each tile means it is easy to be attached on the any metal surface, and also supporting conventional installation by screws and nuts.

             

 Super thin and lightweight

Just 12mm thinness and 0.5kgs weight per tile, it is the thinnest and lightest tile in the market. So it is very easy to be transported and installed. 

Company Profile

DesignLED Technology company limited is based on Shenzhen , China , which is a professional provider of a complete solution of LED screen including the demand analysis , R&D, manufacturing, and professional services . DesignLED already developed the LED scroll(Flexible LED screen), 3D LED display, Lightweight LED screen etc , with more than 10 products are applying for patents from China, EU, US until now.

For more information, please visit the website: www.designledpro.com

Contact:

Angela Xiao, DesignLED

Email: angela@designledpro.com

Website: www.designledpro.com